Bodies Panels   Paint Schemes Numbers are to be applied for . Numbers will be awarded using the sole discretion of the series.   Models   Must be 1980 or newer Must be legal in a street stock or sportsman division at a track located in the North East Region  Any other models must be submitted for prior approval. Special approvals will not be granted at events. Stock height from bottom of frame to the roof Body must be centered on chassis Aftermarket manufactured bodies are permitted. Must keep stock dimensions, angles and curves that are recognized as the factory production make, model and year. Hood must be stock appearing No holes,  must seal Must meet tech visual approval.  (We reserve the right to refuse any  body without reason) Bumper covers must match model of car. No holes or open rear covers Rear Spoiler Minimum 55-degree rear spoiler The spoiler height will be a minimum of 5.0 inches The spoiler height will be a maximum of 6.5 inch The maximum rear spoiler width is 60 inches. The minimum rear spoiler width is 56 inches   External bars / bars not covered by panels are not allowed  Carbonate type rub rail mounted directly to body allowed