| 1 |
Chassis Dyno (winner only) |
| 2 |
Engine Placement Centered beteen frame rails +/- 1.0 inch |
| 3 |
Carb Spacer <$150.00 305- Super Sucker ok All others straight bores - same size |
| 4 |
Weight..... 1350 right side -50lbs for 602 |
| 5 |
FREE PASS |
| 6 |
Crank Shaft Height - 13 inches |
| 7 |
Axels -No gun drilled |
| 8 |
Restrictive Devices - Frame rail must raise 3 inches before tire is raised |
| 9 |
Max gear Ratio - 6.25 |
| 10 |
Tread width Front and Rear 73 inches |
| 11 |
Front spring Rate : 550 or more / purchase for less than 100 |
| 12 |
Shock - $150. 00price check - altered Front directly mounted to lower control arm |
| 13 |
Transmission - 602- 14 lb flywheel / 16lb for all others. Clutch and disc 17lb Cover /Press plate all steel |
| 14 |
Wheel Size- 8.0 inch bead to bead / Weight 20lbs no bleeders |